Page tree

Contents

The set monitor dns command enables network monitoring for DNS. Once enabled, you can do the following:

  • View the average latency of authoritative and non-authoritative replies to DNS queries in 1, 5, 15, and 60 minute time intervals. Use the show monitor command to view the DNS network data.
  • Monitor invalid DNS responses from UDP port 53. Use the show monitor dns alert status command to view the DNS alert status.

This command is useful when troubleshooting DNS and network issues.


Note: This command is not supported for IPv6 in NIOS 7.0 and later releases. When you enable DNS network monitoring, there is a significant impact on DNS query performance.


Syntax

set monitor dns {on | off}

ArgumentDescription
onEnables network monitoring for DNS.
offDisables network monitoring for DNS.

Examples

Turn on DNS network monitoring

Infoblox > set monitor dns on
Turning On DNS Network Monitoring...

Turn off DNS network monitoring

Infoblox > set monitor dns off
Turning Off DNS Network Monitoring...

This page has no comments.