Page tree

Contents

The show routes command displays the current IPv4 and IPv6 routing information on the NIOS appliance and organizes the information according to the interface. This command is a valuable diagnostic tool for connectivity issues.

If you had selected the Enable default route redundancy on LAN1/LAN2 checkbox, then output of this command displays two default routes each having a different metric number. For more information about the checkbox, see About Route Redundancy.

Syntax

show routes

This command has no arguments.

Example

In the following example, default specifies the direct connection to the interface and the static routes are represented (in this example) in bold. You specify static routes by manually entering them through the GUI.

Infoblox > show routes
From LAN:
10.34.33.0/24 dev eth1 scope link default via 10.34.33.1 dev eth1

From LAN2:
10.1.1.0/24 dev eth3 scope link default via 10.1.1.1 dev eth3

From IPv4 main route table:
10.34.33.0/24 dev eth1 proto kernel scope link src 10.34.33.11 10.1.1.0/24 dev eth3 proto kernel scope link src 10.1.1.35 default via 10.34.33.1 dev eth1
From IPv6 main route table:
fe80::/64 dev eth1 metric 256 expires 21257697sec mtu 1500 advmss 1440 metric10 4294967295
fe80::/64 dev eth3 metric 256 expires 21334065sec mtu 1500 advmss 1440 metric10 4294967295
ff00::/8 dev eth1 metric 256 expires 21257697sec mtu 1500 advmss 1440 metric10 4294967295
ff00::/8 dev eth3 metric 256 expires 21334065sec mtu 1500 advmss 1440 metric10 4294967295
default via fe80::204:96ff:fe1d:1980 dev eth1 proto kernel metric 1024 expires 1661sec mtu 1500 advmss 1440 metric10 64
default via fe80::204:96ff:fe1d:1980 dev eth3 proto kernel metric 1024 expires 1661sec mtu 1500 advmss 1440 metric10 64
unreachable default dev lo proto none metric -1 error -101 metric10 255

The following example shows the output when the Enable default route redundancy on LAN1/LAN2 checkbox is selected. It displays two default routes each having a different metric number. For IPv4 networks, the primary default route has a metric value of 0 and the secondary default route has a metric value of 10. For IPv6 networks, the primary default route has a metric value of 1024 and the secondary default route has a metric value of 1124.

Infoblox > show routes
From LAN1:
IPv4 route table:
10.33.55.0/24 dev oct1 scope link
default via 10.33.55.1 dev oct1

IPv6 route table:
2620:10a:6000:2290::/64 dev oct1 metric 1024
default via 2620:10a:6000:2290::1 dev oct1 metric 1024

From IPv4 main route table:
default via 10.34.1.17 dev oct3 proto ifplugd
default via 10.34.52.1 dev oct1 proto ifplugd metric 10
10.33.7.11/29 dev oct3 proto kernel scope link src 10.33.7.11
10.33.7.11/29 dev oct3.103 proto kernel scope link src 10.33.7.11
10.33.55.0/24 dev oct1 proto kernel scope link src 10.33.55.19
10.33.55.0/24 dev oct1.245 proto kernel scope link src 10.33.55.19
10.33.0.0/16 dev oct0 proto kernel scope link src 10.33.1.111
From IPv6 main route table:
2620:10a:6000:2203::/64 dev oct3 proto kernel metric 256
2620:10a:6000:2203::/64 dev oct3.103 proto kernel metric 256
2620:10a:6000:2290::/64 dev oct1 proto kernel metric 256
2620:10a:6000:2290::/64 dev oct1.245 proto kernel metric 256
2620:10a:6000:2500::/64 dev oct0 proto kernel metric 256
fe80::/64 dev oct4 proto kernel metric 256
fe80::/64 dev oct1 proto kernel metric 256
fe80::/64 dev oct1.245 proto kernel metric 256
fe80::/64 dev oct3 proto kernel metric 256
fe80::/64 dev oct3.103 proto kernel metric 256
fe80::/64 dev oct0 proto kernel metric 256
default via 2620:10a:6000:2203::1 dev oct3 proto ifplugd metric 1024
default via 2620:10a:6000:2290::1 dev oct1 proto ifplugd metric 1124


This page has no comments.