Page tree

Contents

Use the show static_routes command to display the current static route configuration on your appliance. To configure static routes, use the set static_route command.
You can also use the show routes command to view the current IPv4 and IPv6 routing information on the NIOS appliance and how the information is organized according to the interfaces.

Syntax

show static_routes [v4|v6]

ArgumentDescription
v4|v6Shows IPv4 or IPv6 static routes. If this is not specified, static routes for both IPv4 and IPv6 are displayed.

Examples

Displaying IPv4 Static Routes

Infoblox > show static_routes v4

Position

Destination

Gateway

1

1.1.1.1/32

192.168.1.11

2

1.1.1.2/32

192.168.1.12

3

1.1.1.11/32

192.168.1.21

4

1.1.1.3/32

192.168.1.13

5

1.1.1.4/32

192.168.1.14

6

1.1.1.5/32

192.168.1.15

7

1.1.1.6/32

192.168.1.16

8

1.1.1.7/32

192.168.1.17

9

1.1.1.8/32

192.168.1.18

10

1.1.1.9/32

192.168.1.19

11

1.1.1.10/32

192.168.1.20


Displaying IPv6 Static Routes

Infoblox > show static_routes v6

Position

Destination

Gateway

1

1111:2222:3333:4444:5555:

1111:2222:3333:4444:5555:6666:7777:9999


6666:7777:1000/125


2

1111:2222:3333:4444:5555:

1111:2222:3333:4444:5555:6666:7777:bbbb


6666:7777:2000/125


This page has no comments.