Page tree

Contents

The show tcp_timestamps command shows whether TCP timestamps are enabled or disabled. If timestamps are enabled, you can view them in the traffic capture file. 

Typically, you run the show tcp_timestamps command before running the set tcp_timestamps command to determine the status of the TCP timestamps. Based on the status (enabled or disabled), you can run set tcp_timestamps to enable or disable the timestamps. 

Syntax

show tcp_timestamps

Example

When TCP timestamps are enabled:

Infoblox > show tcp_timestamps
TCP timestamps are enabled.

When TCP timestamps are disabled:

Infoblox > show tcp_timestamps
TCP timestamps are disabled.
  • No labels

This page has no comments.