Page tree

Contents

The traceroute command displays information on the route IPv4/IPv6 packets. You can use this command to determine the path of an IPv4/IPv6 query. This command provides information on the path packets travel and the time it takes to reach the IPv4/IPv6 destination address.

Syntax

traceroute {hostname | ip_address} [ opt ]

ArgumentDescription
hostname Fully qualified domain name
ip_address Valid IPv4/IPv6 address of the host
opt Can be any of the following:
  • numerical (specifies to not interpret the IP address as a DNS name)
  • src_addr (specifies the starting or "from" address)
  • ICMP (specifies to use ping)
  • v6 (specifies IPv6 hostname)

Example

The following example shows you how to use the traceroute command.

Infoblox > traceroute 10.1.1.1
traceroute to 10.1.1.1 (10.1.1.1), 30 hops max, 40 byte packets
1 10.1.1.5 (10.1.1.5) 1.951 ms 1.637 ms 1.734 ms
2 10.1.1.1 (10.1.1.1) 0.248 ms 0.284 ms 0.239 ms

This page has no comments.