Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

DNS name of the IP. Optional. String Type. Max size 256.

Data Field in IPAM Sync Export File

NetMRI Model->Attribute

Field Description

General Device Data

ip_address

A valid IPv4 addressDevice -> DeviceIPDotted. Required.

ip_addressA valid IPv4 address. Required.

mac_addressDevice -> DeviceMAC

A valid mac address. Must be lowercase. Optional.

last_discovered_timestampDevice -> DeviceTimestamp

Timestamp of last time the discoverer has seen the device. A UTC timestamp. Required.

first_discovered_timestampDevice -> DeviceFirstOccurrence

Timestamp of the first time the discoverer has seen the device. A UTC timestamp. Optional

netbios_name<none>

The NETBIOS NetBIOS name of device. String Type. Maximum size is 15 characters. Optional.

os

Device -> DeviceVersion

The OS of the IP. String Type. Maximum size is 256 characters. Optional.

device_modelThe model of device.
device_vendorThe vendor of device.
device_locationThe location of device.
device_contactThe contact of device.
ouiThe OUI of device.
Attached Device Data (only for endhosts)

network_component_typeDevice -> DeviceType

The type of component connected to the IP. Eg Switch, Router, Other. Optional. String type. Max size 32.

network_component_nameDevice -> DeviceName

Name of component connected to the IP. Optional. String type. Max size 64.

network_component_ description

Device -> DeviceSysDesc

Description of component connected to the IP. Optional. String type. Max size 256.

network_component_ipDevice -> DeviceIPDotted

IP address of component connected to the IP. Optional. String type. IPv4 address format. IPv4 address format.

network_component_modelThe model of component connected to the IP.
network_component_vendorVendor of component connected to the IP.
network_component_locationType of component connected to the IP.
network_component_contactContact of component connected to the IP.

network_component_port_ numberInterface -> SwitchPortNumber

Port number on the component connected to the IP. Optional. Unsigned integer type. Range 0 - 9999.

network_component_port_ name

Interface -> ifName

Port name on the component connected to the IP. Optional. String type. Max size 64.

network_component_port _description

Interface -> ifDescr

Description of the Port on the component connected to the IP. Optional. String type. Max size 256.

Port Data

port_vlan_nameVlan -> VlanName

Name of the Vlan on the Port. Optional. String type. Max size 64.

port_vlan_description

<none>

Description of the port Vlan. Optional. String type. Max size 256.

port_vlan_number

Vlan -> VlanIndex

Port Vlan Number. Optional. Unsigned integer type. Range 0 - 9999.

port_speedInterface -> ifSpeed

Speed settings on the switch port. Optional. String type. Valid values are 10M, 100M, 1G, 10G, 100G, and Unknown.

port_duplex

Interface -> ifDuplex

Duplex settings on the switch port. Optional. String type. Valid values are Full and Half.

port_status

Interface -> ifAdminStatus

Administratively up or down. Optional. String type. Valid values are Up, Down, and Unknown.

port_link_status

Interface -> ifOperStatus

Connected or not. Optional. String type. Valid values are: Connected, Not Connected, and Unknown.

discovered_name

Device -> DeviceDNSName

Cisco ACI Data


VRF and BGP data






Overlay/Overwrite Logic

The following overlay/overwrite logic applies to IPAM Sync, complete the following:

...